Question: What Size Tension Rods Do I Need?

How do you measure tension rods?

* Tension rods are measured from underneath the bolt head to the end of the threads..

What size are drum tension rods?

Drum tension rod, measures 1″ or 26mm from the shoulder of the head to the end. They have a #12-24 thread and are 7/32″ diameter.

Can tension rods hold blackout curtains?

Most likely, yes. I’ve used a few shower curtain rods of similar design on painted drywall, and they do fine. Blackout curtains are not lead-lined or anything. … If you install the expandable rod carefully and don’t expect it to hold the heaviest curtains out there, it should work fine.

Do tension curtain rods work?

Tension rods only work for windows that are on short walls. In other words, the two adjacent walls have to be close enough to the window for you to suspend a rod snugly between them. If the rod doesn’t fit tightly enough, your curtains will collapse. … Generally speaking, tension rods work best in small spaces.

How long can you get a tension rod?

Spring tension rod allows you to add a decorative touch to bathrooms, bedrooms, closets and more. It features a screw-out length adjustment and easily adjusts from 84″ to 120″.

Will tension rods damage walls?

Tension rods can pull paint off the wall where the rubber end caps press. … A problem occurs when a tension rod is pressed up against a painted wall and a disc of paint comes off when it is taken down. Take steps to eliminate the damage a tension curtain rod can do to paint.

How much weight can tension rods hold?

around 20 poundsHere’s a quick answer. A typical tension rod can hold around 20 pounds which is the usual weight of a curtain. Heavy-duty tension rods are capable of supporting more than 20 pounds.

Can you put two tension rods together?

The In-Tension Rod Joiner allows you to combine multipe In-Tension rods for wider windows. … Use one Joiner and two 30″ – 52″ In-Tension Rods to achieve a width of 90″ – 104″. Use one Joiner and two 52″ – 90″ In-Tension Rods to achieve a width of 104″ – 180″.

Why does my tension shower rod keep falling down?

From homeguides.sfgate.com: If the walls on either side of the shower are drywall, you may not be able to tighten the tension rod enough without cracking the walls. Closet pole holders will keep the rod from falling. … Paint them the wall color to hide them, or spruce them up with another color and make them a feature…

How do I make my tension rod longer?

Locate the point where the two sections of the tension rod fit together. Tension rods have two interlocking shafts with a strong spring inside. Place one hand on either side of the spot where the rods connect and twist counterclockwise to lengthen the tension rod or clockwise to shorten it.

Will a tension rod hold clothes?

YES! * Curtains, drapes, clothes, room dividers, etc,shower curtain rod,curtain rods. HEAVY DUTY: Tension rods can bear 20pounds,It is your blackout window curtain rod but also your shower tension rod and laundry clothes drying rack. YES!

Can you hang plants from tension rod?

The tension rod is a spring and screw system that uses, as the name implies, tension, to lodge itself between walls. It’s traditionally used for hanging curtains, clothes, and room dividers, but it also works for hanging plants.